How To Fix A Bathroom Blockage | Best Maintenance Tips For Toilet
Although a blocked toilet is rare, it can be a serious problem in the long term if it isn't dealt with promptly. These are some best tips to help you deal with a blocked toilet and keep it clean.
First, it is important to know how the toilets get blocked. When you understand its functionality, you will know better where you lack and what becomes the reason for the blockage. A siphon is a pipe that links to the toilet bowl, drains any dirty water, and also keeps the water level constant. This acts as a water lock and prevents any gasses or odors from entering your rooms through the pipes. The pipe is approximately 100mm in diameter and connects to the water outlet pipe at 90-110mm. The siphon and pipe could become blocked.
If you don't want major bathroom maintenance, prevention is the best option. Follow the instructions at the end to avoid putting anything down the toilet.
Unexpected toilet blockages can happen at any time. Read on to learn how to prevent them.
How difficult it can be, is dependent on the difficulty level of unblocking your bathroom. Here are some steps to follow so that you can unblock your toilet regardless of how bad it is.
Step by step instructions on how to fix a bathroom blockage
There are many ways to clear a blockage in your bathroom. You don't always have to call a professional. These methods will help you unblock your toilet. Some of them can be done with simple tools and products that you likely already have at home.
Use a plunger
You can get your toilet running again by using a plunger. In few steps, you can restore your toilet's working order.
- You can manually drain enough water from the toilet bowl to allow you to plunge without spitting or overflowing during the process. To give your plunger some space, we recommend that you use a small bucket or bowl to gently drain excess water.
- Place the plunger gently in the bowl. Slowly lower it and let the air out from the plunger.
- For the bottom of your toilet bowl, seal it tightly. Now you can push the clog from the pipe.
- To plunge into a toilet by hand, use a straight up-and-down motion. The toilet trap should be forced into the pipes by the plunger. You should notice a decrease in water level after the toilet has been successfully plunged.
- Place a gallon of water in a large container and pour it into the toilet bowl. If the water level in the toilet bowl is lower, it means that the blockage has been cleared
- Continue to pour water into the drain until the water level drops.
These methods may not work the first time. You might have to try them again to clear it completely. If your toilet is still not draining correctly after multiple attempts, please contact our technical support.
Use unblocking liquid
There are many brands that sell liquids to unblock your toilets. You will usually need to pour the liquid into your toilet and allow it to work for several hours. However, the manufacturer's instructions should be followed.
Some other options
If you don’t have a plunger to unclog your toilet then there are other alternatives available that can work for you.
Unclog Your Toilet with Soap and Hot Water
- Remove some water manually, making sure there is enough space to add a liquid. Use a small container, such as a cup from your bathroom sink to remove the water. Be sure to not put the water back on the counter.
- Add some dish soap, or a few drops of bar soap to lubricate your toilet bowl.
- Hot water can be poured into a toilet by hand. Just right is a drinkable water temperature is enough. Too hot water can cause cracks in your toilet bowl. Let the water sit in the bowl for 20 minutes.
- You can now flush the toilet. If the toilet flushes, it's good to go! If it overflows, you can turn off the water valve behind the toilet.
Unclog your toilet with a coat hanger
One more trick that can work for you is, using a coat hanger. Take a wire coat hanger and untangle it. Then, put on disposable gloves.
Hands cutting a hanger
Hold a hanger in your hands, wrap one end with a cloth and secure it with duct tape so it doesn’t scratch your toilet. To push the debris down the pipe, use the hanger. Twist the wire and push it in a circular motion. This task is not possible if you don't feel the wire touching the obstruction.
If your toilet is still backed up after multiple attempts to flush it, you should call for help.
Unclog a Toilet with Baking Soda and Vinegar
After trying several things to clear the problem, you should drain at least half the water from your toilet bowl. Next, pour baking soda and vinegar into your toilet. You will see bubbles in the mixture so it is important to drain any excess water. Allow the bubbles to sit for at most 20 minutes before flushing.
Some Ways to Prevent a Bathroom Blockage from Happening
A well-maintained toilet will help you avoid a blocked one. It's possible that it is happening more often than you think.
Substandard or improperly installed pipes can lead to waste accumulation and blockages. You should contact a professional to make any necessary adjustments to your pipes.
If the pipes are extremely old or have become worn, blockage or leakage can happen. In such cases, you should contact a professional to replace the pipes.
However, not all toilet blockages involve pipes. One of the best ways to keep the risk of toilet blockages to a minimum is to avoid using your toilet as garbage.
Blockages can be caused by the buildup of toilet paper, wipes, or dental floss. This is one of the most common causes of blockages in the bathrooms.