Most Common smart Toilet Problems & Solutions

Most Common smart Toilet Problems & Solutions

The smart toilet market is soaring as people look to save time and money with automated toilets. The first fully automated toilet was the Lixil Satis, released in 2014. Since then, many companies have started to develop smart toilets. These are some common smart toilet problems that users may experience over time, and what you can do about them.

According to the study on bathrooms , one in five people has a clogged toilet at home due to improper use of it. Too much toilet paper and other non-flushables like baby wipes and menstrual products can get stuck in between the toilet's pipes, causing a blockage. This is common with smart toilets as well because the smart functions rely on advanced technology to function correctly.

Possible causes for this problem include:

A blockage of the bowl drains hole or a malfunctioning smart tank unit. This can be resolved by checking the sewage line to see if it has any obstructions, or by replacing the smart tank unit. This is not recommended because it requires hiring a professional to fix the issue.

A fault in pressure sensor's operation- The pressure sensor function keeps track of how full the bowl is and let’s water flow accordingly. If this does not work properly, the toilet can keep running even if no waste material has been flushed.

A leak in the smart tank, which is visible by water leaking from the base of the unit- To resolve this, you need to check for cracks or damage and change out any damaged parts.

A clogged vent that is not allowing air to flow through the system in order for the water to drain and be flushed away- To resolve this, you need to clean out the vent and check for blockages in it. A replacement smart tank unit can costs upto $300 and up.

Odors: Another common issue with smart toilets is awful odors while flushing. This can be resolved by getting the internal components of the toilet checked for pipe leakage. In many cases it has been observed that an improper seal between different components of the toilet's smart functions have lead to leaks.

Other possible Reasons of Odors in bathroom are-

-Use of too much detergent which leads to just blocking the drain hole, so that water can't go through it. Thus, it is recommended to use only a little bit of washing powder. Press the handle after finishing your job.

-Leaking of water, it can be because of pressure problems, but if there is leaking of water, it is recommended to stop the water supply and to check for leaks.

-Timer problem: If your toilet stops working after a while and you need to fix the timer button either by pressing or moving it to make it work again, is because of a problem with the timer. There are some problems which change after time, so if smart toilet doesn't work anymore after a long period of time, check for any possible water leaks and also check the battery.

 

To prevent any unpleasant odor in your bathroom there is a simple solution: try to use as little detergent as possible and press the handle after you finish your job (for example 1/4 of scoop).

If there is any unpleasant odor in your house, stop water supply and check for possible leaks. If there is no leakage, change the battery because it could be too low energy.

Another reason of bad smell can appear because of blocked drain hole. After using too much detergent, the water will not be able to go through it. Thus, if you use soap after that your toilet might block or it can also block because of a problem with pressure. If there is any leaking of water then there might be a leakage from one part to another which can cause serious problems. In this case, stop water supply and check for possible leaks.

Running: The final common issue with smart toilets is running. This can be caused by an obstructed flushing system or a faulty pressure sensor that doesn't detect that there is sufficient waste material in bowl. Both issues can be resolved through checking components life expectancy, flushing mechanism functionality, and pressure sensor functionality.

Possible Solutions: Make sure to only use the recommended toilet paper and flush in small amounts at a time. Drain cleaning can also be an effective way of clearing out

A smelly toilet is usually caused by a buildup of bacteria in the bowl causing an odor. To clean your toilet, use non-bleach chlorine or clorox wipes to remove stubborn stains and soak up any excess water.

Do not use chemical drain cleaners as this can damage your plumbing system and cause harsher smelling odors. Also, avoid using oils to clean your toilet. If this is not working, have a plumber replace your old flapper valve with a quieter and more efficient model.

The affordable smart toilets start at around $1,500 but can run into the tens of thousands depending on extras such as seat warmers and bidet functions.

A toilet with a seemingly faulty flush may actually have a faulty flapper valve, which allows water into the toilet tank. Replacing your old flapper valve will cost about $25 and is an easy do-it-yourself project.

If you notice that your smart toilet has stopped working or is not flushing properly, check for power to the smart toilet bowl by plugging in the power cord and seeing if it turns on. If that fails, check your circuit breaker panel to see if there has been a power outage. If none of these steps succeeds, you may need to call a plumber to replace parts such as the control board or pump assembly.

The most common smart toilet feature malfunctions are related to the touch screen or remote controls. If your remote control is not working, check for dead batteries and replace them if necessary.

For more information and purchase smart toilet online, visit Cocobellabath


Leave a comment

Please note, comments must be approved before they are published